SACC-DSI-MS-8CON-M12-SCO SH

https://www.phoenixcontact.com/us/products/1552997 Panel feed-through - SACC-DSI-MS-8CON-M12-SCO SH - 1552997 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 8-pos., M12 SPEEDCON, shielded, rear/screw mounting with M12 thread, with straight solder connection Why buy this product  Easy PCB assembly: one-piece connectors for wave soldering  All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design  SPEEDCON fast locking system reduces cabling times  For high transmission reliability: optional shield connection to the housing by means of shield contact Key Commercial Data Packing unit 1 STK Minimum order quantity 20 STK GTIN GTIN 4046356162029 Weight per Piece (excluding packing) 8.500 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General 04/12/2017   Page 1 / 4 https://www.phoenixcontact.com/us/products/1552997 Panel feed-through - SACC-DSI-MS-8CON-M12-SCO SH - 1552997 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 1.5 Nm ... 2 Nm (Installation-side) Mounting type Rear mounting M12 x 1 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Standards/specifications M12 connector IEC 61076-2-101 Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” 04/12/2017   Page 2 / 4 https://www.phoenixcontact.com/us/products/1552997 Panel feed-through - SACC-DSI-MS-8CON-M12-SCO SH - 1552997 Drawings Dimensional drawing Schematic diagram Ø12,2 +0,1 max.4,0 Pin assignment M12 plug, 8-pos., view plug side 11+0,1 Panel cutout Dimensional drawing 45° 20 2,5 2,5 Ø0,8 Ø13,5 15 M12x1 2,8 14 6,2 Drilling diagram Ø1,2* !4,5 Ø5,5 M12 flush-type connector Dimensional drawing 16 Ø 14 ,5 10,8 Front view of M12 flush-type connector Approvals Approvals 04/12/2017   Page 3 / 4 https://www.phoenixcontact.com/us/products/1552997 Panel feed-through - SACC-DSI-MS-8CON-M12-SCO SH - 1552997 Approvals Approvals UL Recognized / cULus Recognized / EAC Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 26-20 Nominal current IN 2A Nominal voltage UN 30 V cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 24-22 Nominal current IN 2A Nominal voltage UN 30 V EAC      FILE E 118976  E221474-20140616  B.01742 Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 04/12/2017   Page 4 / 4